The receivers below apply relay(s) as switch(es), through the received signals the relay is activated. Normally the supply terminals and load terminals are separate from each other, and supply voltage is 12VDC, load is DC or AC. Also we can supply receiver with AC supply, as there is restricting standard in USA and Europe, receiver need be re-designed and manufactured according to the rules. There are 20 frequencies more selectable with the receiving modules (from 260MHz to 440MHz), most of the receiver apply decoder PT2272, PT2294, SC2272, CS2272 etc. , with excellent performance.
Model No.
Output Mode
RR1-L
Latch
RR1-M
Momentary
RR1-T
Toggle
Single Channel Receiver series, 5 pin wiring terminal, normally open and normally close output terminals.
Code Type:
Fixed Code
Output Mode:
Latch/Momentary/Toggle, Separate
Supply Power:
12VDC
Quiescent Current:
8mA
Operation Current:
25mA less
Relay:
3A 220VAC, 3A 30VDC
Dimension:
38mm×28mm×15mm
The matching transmitter: Single channel transmitter for Momentary receiver and Toggle receiver, Double channel transmitter for Latch receiver.
Model No.
Output Mode
RR1LN
RR1LNC
Latch On
Latch Off
Momentary
Toggle
Magic 1CH / Magic 1CH C, Single Channel Receiver series, Learning Code type, 4 control modes are built in the same unit. Among RR1LNC is FCC compliant. Click the picture left to see further detail information.
Code Type:
Learning Code
Output Mode:
Latch On/Latch Off/Momentary/Toggle
Supply Power:
12VDC
Quiescent Current:
8mA
Operation Current:
25mA or so
Relay:
10A 28VDC/7A 240VAC
Dimension:
38mm×28mm×20mm
The matching transmitter: All RFRemotech OOK transmitters/remotes are compatible with the receivers.
Model No.
Output Mode
RR2-L
Latch
RR2-M
Momentary
RR2-T
Toggle
2 Channel Receiver series, normally open output terminals, common pole terminal.
Code Type:
Fixed Code
Output Mode:
Latch/Momentary/Toggle, Separate
Supply Power:
12VDC
Quiescent Current:
6mA
Relay:
20A 12VDC(NO), 12A 14VDC(NC), 7A 120VAC
Dimension:
68mm×38mm×19mm
Any of 2 channel transmitter is compatible with the receivers.
Model No.
Output Mode
RR2LN
RR2LNC
Latch On
Latch Off
Momentary
Toggle
Magic 2CH / Magic 2CH C, Two Channel Receiver series, Learning Code type, 4 control modes are built in the same unit. Among RR2LNC is FCC compliant. Click the picture left to see further detail information.
Code Type:
Learning Code
Output Mode:
Latch On/Latch Off/Momentary/Toggle
Supply Power:
12VDC
Quiescent Current:
8mA
Operation Current:
25mA or so
Relay:
10A 28VDC/7A 240VAC
Dimension:
54mm x 39mm x 20mm
The matching transmitter: All RFRemotech OOK transmitters/remotes are compatible with the receivers.
Model No.
Output Mode
RR4-L
Latch
RR4-M
Momentary
RR4-T
Toggle
4 Channel Receiver series, normally open and normally close output terminals.
Code Type:
Fixed Code
Output Mode:
Latch/Momentary/Toggle, Separate
Supply Power:
12VDC
Quiescent Current:
7mA
Relay:
3A 220VAC, 3A 30VDC
Dimension:
62mm×39mm×15mm
Any of 4 channel transmitter is compatible with the receivers.
Model No.
Output Mode
RR6-L
Latch
RR6-M
Momentary
6 Channel Receiver series, normally open output terminals, common pole terminal.
Code Type:
Fixed Code
Output Mode:
Latch/Momentary, Separate
Supply Power:
12VDC
Quiescent Current:
8mA
Relay:
20A 12VDC(NO), 12A 14VDC(NC), 7A 120VAC
Dimension:
68mm×50mm×18mm
6 channel transmitters are compatible with the receivers. Normally the ranges of matching transmitter are 500m, 1000m, 2000m.
Model No.
Output Mode
RR8-L
Latch
RR8-M
Momentary
RR8-T
Toggle
RR8-4M4T
4Momentary 4Toggle
8 Channel Receiver series, normally open output terminals, common pole terminal.
Code Type:
Fixed Code
Output Mode:
Latch/Momentary/Toggle, Separate
Supply Power:
12VDC
Quiescent Current:
8mA
Operation Current:
25mA less
Relay:
20A 12VDC(NO), 12A 14VDC(NC), 7A 120VAC
Dimension:
38mm×28mm×15mm
8 channel transmitters are compatible with the receivers. Normally the ranges of matching transmitter are 500m, 1000m, 2000m. The microchip is exchangeable for the application of different output modes, see Technical Support for the detail.
Model No.
Output Mode
RR12-L
Latch
RR12-MT
Momentary/Toggle
RR12-6M6T
6Momentary 6Toggle
RR12-8M4L
8Momentary 4Latch
12 Channel Receiver series, normally open and normally close output terminals.
Code Type:
Fixed Code
Output Mode:
Latch/Momentary/Toggle, among Momentary and Toggle are built in the same PCB
Supply Power:
12VDC
Quiescent Current:
8mA
Relay:
20A 12VDC(NO), 12A 14VDC(NC), 7A 120VAC
Dimension:
38mm×28mm×15mm
12 channel transmitters are compatible with the receivers. Normally the ranges of matching transmitter are 500m, 1000m, 2000m. The microchip is exchangeable for the application of different output modes, see Technical Support for the detail.
Please Notes:
The Transmitting Ranges above are based on that transmitter and receiver are placed in a open space and there is no obstacle between the both units, and the placed height is more than 1.5 meters above the ground.
Only oscillating resistances of transmitting unit and receiving unit are matching to each other, and the codes of both are the same, the transmitting unit will be compatible with the receiving units. Please go to Technical Support for the details.
In order to keep security and anti-jam of operating, the matching transmitting unit(s) and receiving unit(s) should be encoded/decoded.
